欢迎访问浙江西卡姆电力设备有限公司! 共有 共有392条订单,190条信息反馈,请及时查看!
首   页 公司简介 产品展示 资质荣誉 新闻中心 在线订单 信息反馈 营销网络 联系我们
最新公告: 热烈祝贺浙江西卡姆电力设备中标2010中央政府采构
产品搜索:
 

产品列表 Products  
XKM系列绝缘穿刺线夹(1KV)
XKM/HYJ、HTD2系列绝缘穿...
XKMC 系列绝缘穿刺线夹(1KV...
XKMF 系列绝缘穿刺线夹(1KV...
XKMC10系列绝缘穿刺线夹(10...
XKM/V0系列防火绝缘穿刺线夹(...
XKM/ V0系列防火绝缘穿刺线夹
XKM/V0系列防火绝缘穿刺线夹(...
XKMC/ V0系列防火绝缘穿刺线...
XKMF/ V0系列防火绝缘穿刺线...
XKMC10/ V0系列防火绝缘穿...
TTDM系列绝缘穿刺线夹(1KV)
TTDF系列防火绝缘穿刺线夹(1K...
TTDM系列绝缘穿刺线夹
XKM/TTD 80系列分步式多支...
XKM/NTD系列绝缘穿刺线夹
XKM/NTD-2系列分步式绝缘穿...
XKM/TTDC系列绝缘穿刺线夹
XKM/DFY1、2型电能计量联合...
XKM/PJ1、2型电能计量联合接...
XKM/HYL型电能计量联合接线盒
XKM/JHD-1系列单相计量箱专...
XKM/JHD系列一户一表计量箱专...
XKM/HY2 系列单相计量箱专用...
XKM/JHD-2系列三相计量箱专...
XKM/JHD-3系列可重复接地计...
XKM/JHD-4系列一进多路输出...
XKM/JHD-5系列计量箱输出接...
XKM/JHT系列大电流多路输出计...
XKM/JTS2系列端子,端子中的...
电表架
XKM/JH27系列大电流接线端子...
XKM/JXT1 系列“T”接端子...
XKM/YW 电缆分支器
XKM/JXT2 系列“T”接端子
XKM/HYT 系列主干线分线器
XKM/JHD-8系列自升计量箱输...
XKMHD-1导轨式(固定式)接线...
XKM/JHD-6系列自升计量箱接...
XKM/JDG-8系列自升计量箱输...
XKM/JDG-6系列自升计量箱接...
XKM-1系列主干线分支线夹(防窃...
XKMB系列底座封闭型接线端子排
XKMF系列多用途封闭式防窃电接线...
XKMG系列开关端子
XKM/47(63型)系列开关端子
XKM/47LE(100型)系列开...
XKM/158(100型)系列开关...
XKMG-100/10-35 系列...
XKMG-250/16-50 系列...
XKMG-400/25-70 系列...
XKMG-600/35-95 系列...
XKMG-600/35-95系列开...
XKMN-100/10-35 系列...
XKMN-250/16-50 系列...
XKMN-400/25-70 系列...
XKMN-600/35-95 系列...
XKMG 系列开关端子
XKMNB-100/10-35系列...
XKMNB-250/16-50 系...
XKMNB-400/25-70 系...
XKMNB-600/35-95 系...
XKMQ-1~4 系列自升接线端子
XKM/JXH系列接线盒
XKM/JXH-4系列接线盒
XKM/JXH-5系列接线盒(翻盖...
XKM/JXH-6系列接线盒(透明...
XKM/JXH-7系列接线盒(翻盖...
XKM/JXH-8系列“T”接线盒...
XKM/JXH-9系列“T”接线盒...
XKMZT/XKMFZ系列地埋式防...
XKMSD遂道专用分支防水接线盒
 

产品展示 Products  
XKM/JTS2系列端子,端子中的“变形金刚”            [返回]
一、产品概述 Genera
        XKM/JTS2系列多用途接线端子系专为各类电控配电设备,成套装置及组合式终端电器箱中配线而设计。产品的额定绝缘电压690V, 额定工作电压380V,进线端连接导线的最大截面为120mm2,出线端按连接回路数的多少以及接线方式的不同,分别可连接导线的截面为2.5-120mm2。该产品结构新颖独特; 接线牢固可靠;使用灵活方便。可作各类电气装置中母线排、大电流端子、接零、接地端子、等电位端子之用。
        XKM/JTS2 series terminal block is designed for wiring in electric control distribution equipment, complete equipment and terminal apparatus , etc.. The product is of rated insulation voltage 690V, rated working voltage 380V, max section of inlet terminal conductor 120mm2. According to different circuit number and connection ways, the section of outlet terminal reaches 2.5-120mm2. This product structure has advantages of original structure, firm connection
and flexible operation. In addition, it can also serve as electric equipment busbar, heavy-current terminal block, neutral terminal, grounding terminal, equipotential terminal, etc..
二、结构特点 Structure features
        XKM/JTS2多用途端子由导电件、绝缘座和防护罩组成,体积小巧,结构可靠,其进线端既可以将导线直接接入(简式连接)、也可用OT端头(线鼻子)连接(板式连接),亦可接入宽度≤30MM的铜排,其出线端则统一为筒式连接。压线螺钉的底部为特制的球形压线时不仅不伤导线,而且对导线具有足够大的挤压力,接触更可靠。
        XKM/JTS2 series terminal block cover, with compact volume and reliable structure. Through its inlet terminal, the conductor can be connected directly (simple connection), or connected withOT lug (panel connection), in addition, this
inlet terminal also allows the copper busbar not exceeding 30MM to enter, and all connections at the outlet terminal are of the barrel type. The bottom of crimping screw is spherical shape, which takes no damage over the conductor when crimping, and even brings big enough extrusion force over the conductor and have more reliable contact.
三、安装与使用 Installation & Use
        本系列产品提供了两种安装方式:1、直接在底板上打孔安装(仅限外形尺寸为78×63×36,安装螺钉为M5);2、安装在TH一35导轨(顶帽轨)上。接入导线建议使用多芯线,导线插入盲孔时要确认插到底后方能往下拧螺钉,以防误接。当接入导线截面较小,且导线绝缘能塞进接线孔时,在确保导体接触可靠的前提下,允许绝缘进入接线孔。当使用时或线路进行维护需要打开防护罩时,只需在防护罩的搭勾处向内用手轻捏便可取下,亦可用螺丝刀从搭勾处插入,轻轻旋转即可取下。装防护罩时要在四个搭勾处向下施压,确保每个搭勾全部卡在孔内方可。
        There are two ways to install this product: 1. Drill a hole in the bottom plate directly and install (only for the product whose outline size is 78×63×36,and mounting screw is M5); 2. Install it on TH一35 rail (top-hat rail). It is suggestedthatmulti-corewireshould be used for connecting conductors. And only the conductor is inserted into the bottom of blind hole thoroughly, could the screw be tightened down to prevent wrong connection. When conductor section is small, and conductor insulator can be stuffed into the connection hole, the insulator is allowed to enter into the connection hole on the premise of reliable contact of conductor. If the protective cover is required to open, pinch the lap of protective cover inward slightly, insert a screwdriver into the lap, then rotate it slightly. When to assemble the protective cover, apply the pressure to four laps, and make sure every lap into the hole.
 

此页内容分页显示 共有9页 [1] [2] [3] [4] [5] [6] [7] [8] [9]             [返回]

 
 
 
Copyright © 浙江西卡姆电力设备有限公司.  All Rights Reserved. [后台登录]  全国统一客服热线:400-001-5588
制作维护:传信网络
 
电话:0577-61616111  61616112   传真:0577-61616110  61616113   地址:浙江省乐清市象阳镇四板桥工业区   E-mail: xikamu@xikamu.com
友情链接: AV插座 气动点焊机 高压熔断器 看门狗真空断路器 LED防爆灯 EPS应急电源 温州抽粪 固体绝缘环网柜GTXGN-12整机 钢制热镀锌电缆桥架 可编程三相智能数显表